Absolute ProTM

ABSOLUTE PRO™ perimeter intrusion detection system (PIDS) is a dual technology module barrier with high security level, which combines unique digital bidirectional infra-red technology with digital microwave technology in one device. The designed and constructed system is used for security of external areas. Long-range dual technology barrier system (range between the transmitter and the receiver of up to 200 m) is designated for security of high-risk areas and critical infrastructure, in which conventional technologies do not ensure sufficient security level, i.e. the top level of intruder detection with simultaneous minimisation of so-called false alarms. ABSOLUTE PRO ™ is a unique active barrier capable of maintenance of high level of security during thick fog, heavy rainfall, strong snowfall and sandstorms. The system provides maximum reliability in detection of an intruder with minimum false alarms and it may be adjusted in terms of height and number of components, meeting the expectations relating to high standards of facility security guaranteeing.
 
Bariery Absolute Pro
Without any additional interfaces, ABSOLUTE PRO™ barriers may be easily integrated with existing or new IP backbone networks practically in any locations. The advantages of IP network solutions are: remote access to system maintenance and diagnostics, easy connection, better scalability, flexibility and profitability of investment.
 

The dual technology barrier system has a number of unique functions implemented in the device:

  • Each infra-red beam installed in ABSOLUTE PRO™ barrier is equipped with a microprocessor, thanks to which it is possible to define and programme up to 5 alarming scenarios. The algorithm may be used for improvement of system operation and filtering of alarms connected with activity of animals (small animals, flying birds), thanks to which it enhances the ability to detect real alarms.
  • Another key innovation in ABSOLUTE PRO™ is introduction of signal effectiveness analysis (SEA), a maintenance tool which continuously monitors stability of optical communication and efficiency of each infra-red module. The system sends information to the operator automatically at the moment when the system requires inspection. SEA is used for monitoring of condition of the device depending on pollution of the front column cover or external disturbance of infra-red beam.
  • Thanks to the use of patented bidirectional infra-red beam technology, the system is fully resistant to direct sunlight or to external light sources, which are often the main reason of occurrence of false alarms in conventional infra-red barriers.
  • Communication between ABSOLUTE PRO™ Slave (TX) and Master (RX) barriers is optical and does not require the use of any synchronisation wiring, which results in the fact that the installation procedures are simpler and less expensive. Security of optical data transmission is guaranteed by continuous regeneration of specific codes protected by checksums.
  • ABSOLUTE PRO™ barrier system provides not only basic alarm information but also information on the target direction of movement of the intruder, thanks to which tracking of the target by means of CCTV video cameras on facility perimeter is easier and more accurate.
  • ABSOLUTE PRO™ system barriers may adjust themselves to every drastic change of the environment, such as heavy snowfall or sandstorm, as well as to growth of grass through temporary disabling of the IR beams which are temporal and covered by the external elements.
  • ABSOLUTE PRO™ barriers are delivered in standard configurations, with the possibility to increase the number of the IR beams and/or column height. From the columns of the height of 3 metres equipped with 3 infra-red modules and one microwave barrier to the column height of 6 metres with 18 IR modules and two MW modules. There is a possibility of pre-definition of configuration of devices for the purposes of their adjustment to facility architecture.
     
It is possible to install additional elements in ABSOLUTE PRO™, such as Doppler detector (integrated with the microwave module), dome & push detector, battery. ABSOLUTE PRO™ barriers are delivered in standard configurations, with the possibility to increase the number of the IR beams and/or column height. From the columns of the height of 3 metres equipped with 3 infra-red modules to the column height of 6 metres with 18 IR modules. There is a possibility of pre-definition of configuration of devices for the purposes of their adjustment to facility architecture.


ABSOLUTE PRO™ is characterised by easy integration with superior systems, such as BMS (Building Management System) and SMS (Security Management System).
 
Absolute Pro - doppler

Catalogue cards

ABSOLUTE PRO™ - The IP Dual Tech Barrier

We encourage you to ask questions and to acquaint yourself with the functionality of the perimeter security system.

Please address all inquiries to:
Marcin Stępień
Security System Specialist

+48 697 888 787